Craftsman Incredi-Pull 316.29256 Operator's Manual page 11

OPERATmNG TraPS
WARNmNG:
Dress propedy to
reduce the risk of
injury when operating this unit. Do not
wear Hoose cHotNng orjeweHry. Wear eye
and ear/hearing protection. Wear heavy
Hong pants, boots and gHoves. Do not wear
short pants, sandaHs or operate barefoot.
Move the cultivator to the work area prior to starting the
engine. Transport the cultivator by pushing it on its
roller wheel or by carrying it by the transport grip.
WARNmNG: To
prevent
serious
persona] injury,
never pick-up or carry the unit while the
engine is running.
2. Start the unit by foHHowingthe Starting Instructions
3. With the engine running and the tines off the ground,
depress the throttle control to increase the engine speed.
4. HoHding both of the handHebar grips firmHy, showily
Hower the cuHtivator untiHthe tines make contact with
the ground (Fig. 11).
5. As cuHtivating action begins, puHH back on the
cuHtivator so that the tines can penetrate the ground.
6. Once the ground has been broken, continue at a
moderate pace untiHyou are famiHiarwith the controHs
and the handHing of the cuHtivator.
7. To improve the depth of cuHtivation, puHH back on the
unit as it moves forward to drive the tines deeper
into the ground.
8_
WARNING: To
prevent
serious
personaH injury, use
extreme caution when reversing
or pulling the unit towards you.
If the tines are digging too deep or not deep enough,
adjust them according to Adiusting Tine Depth.
Transport
Grip
Fig, 11
TRANSPORTING THE UNIT
WARNING: To preventser ous
personaH injury,
aHways stop the engine when operation is
deHayed or when transporting the unit from
one Hocation to another
1. Stop the engine.
2. Slide the roller bracket assembly all the way down.
3. TiHtthe unit back untiH the tines dear the ground.
4. Push or puHH the unit to the next Hocation.
5. If you need to move the unit over Hongdistances, use
11