Unpacking; Removing From Crate; Loose Parts - Yard-Man 13A-325-402 Operator's Manual

UNPACKING
Removing From Crate
• Remove all screws from bottom of the crate
using a 1/4" socket or a flat blade screwdriver.
• Holding the sides of the crate firmly, lift the
crate up and keep it aside. Avoid tire
punctures.
• Remove and discard plastic bag which covers
the unit.
• Lift the rear of the mower and clear the bottom
of the crate. Repeat for the front.
Be sure parking brake is disengaged; roll unit
out of the crate's way.
Loose Parts
You will find the following loose parts in the crate. To
identify these parts, see Figure 1. Remove loose
parts very carefully so as not to damage or lose any.
1. Steering wheel components: steering wheel, cap,
shaft, tube
2. Operator's manual (not shown in Figure 1)
3. Mulching plug & side-discharge chute
4. Oil drain sleeve
5. Battery acid pack* (not shown in Figure 1)
6. Battery cover
7. ignition keys (net shown in Figure 1)
8. Steering gear cover
9. Bumper (optional)
10. Hitch Plate (optional)
* Not included as booso part if unit shipped with wet battery
Side-Discharge Chute
Mulching
Plug
Bahery
Cover
Seat
Steering
Shaft
, Oil Drain
Sleeve
Steering
Wheel
Steering
Wheel
Cap _--_-_
Steering
Tube
J
Hitch Plate
(Optional) Bumper
Figure 1
Steering
Gear Cover