Advertisement
UNPACKING
Removing
From Crate
•
Remove all screws from bottom of the crate
using a 1/4" socket or a flat blade screwdriver.
•
Holding the sides of the crate firmly, lift the
crate up and keep it aside. Avoid tire
punctures.
•
Remove and discard plastic bag which covers
the unit.
•
Lift the rear of the mower and clear the bottom
of the crate. Repeat for the front.
•
Be sure parking brake is disengaged; roll unit
out of the crate's way.
Loose Pads
You will find the following loose parts in the crate. To
identify these pads, see Figure 1. Remove loose
parts very carefully so as not to damage or lose any.
1.
Steering wheel components: steering wheel, cap,
shaft, tube
2.
Operator's manual (not shown in Figure 1)
3.
Mulching plug & side-discharge chute
4.
Oil drain sleeve
5.
Battery acid pack* (not shown in Figure 1)
6.
Battery cover
7.
Ignition keys (not shown in Figure 1)
8.
Steering gear cover
9.
Bumper (optional)
10. Hitch Plate (optional)
*
Notincluded as loosepart if unit
s hipped
with wet
battery
Side-Discharge
Chute
Mulching
Plug
Seat
Steering
Shaft
Steering
Wheel
rein
Sleeve
Steering
Wheel
Cap
Steering
Tube
J
Hitch Plate
(Optional)
Bumper
_;_
_onal)
Figure 1
Steering
Gear Cover
Advertisement
