ADJUSTMENTS
Bevel Adjustment
Theangle of the edgerblade canbe adjustedby placingthe bevel
adjustmentin one of three positionsfor edging.See Figure3.
f
j, ','.
'
,\\
,.
J
Figure3
SET-UP
Gas & Oil Fill=Up
Use extremecautionwhenhandlinggasoline.Gasolineis extremely
flammableand thevaporsare explosive.Neverfuel the machine
indoorsor whilethe engineis hotor running.Extinguishcigarettes,
cigars,pipesand othersourcesof ignition.
How To Check/Add
Oil
Beforeaddingor checkingthe oil
•
Placeenginelevel.
•
Cleanthe oil fill area of any debris.
1.
Removethe dipstick(A) and wipe witha cleancloth. See
Figure4.
.
3.
4.
5.
Figure4
Insertand tighten thedipstick.
Removethe dipstickand checkthe oil level. It shouldbe at the
FULLmark (B) on the dipstick.
If low, add oil slowlyinto theengineoil fill (C). Do notoverfill.After
addingoil, wait one minuteand then recheckthe oil level.
Replaceand tightenthe dipstick.
9