Troubleshooting - Craftsman INCREDI.PULL 316.794970 Operator's Manual

Incredi.pull with max fire ignition 2-cycle mulching blower/vacuum
Hide thumbs Also See for INCREDI.PULL 316.794970:
Table of Contents

Advertisement

Available languages

Available languages

CAUSE
1. Empty fuel tank
2. Primer bulb wasn't pressed enough
3. Engine flooded
4. Old or improperly mixed fuel
5. Fouled spark plug
6. Plugged spark arrestor
7. Red EZ-Fire
TM
Lever wasn't flipped/set
8. The outside temperature
is below 40 ° F
9. The outside temperature
is above 90 ° F
10. Throttle lever is in the incorrect position
CAUSE
1. Air filter is plugged
2. Old or improperly mixed fuel
3. Improper carburetor adjustment
CAUSE
1. Old or improperly mixed fuel
2. Improper carburetor adjustment
3. Dirty air filter
4. Plugged spark arrestor
CAUSE
1. Old or improperly mixed fuel
2. Improper carburetor adjustment
3. Fouled spark plug
4. Plugged spark arrestor
5. Air filter is plugged
CAUSE
1, Bag full
2. Blocked tube
3. Blocked impeller
4. Damaged impeller
ACTION
1. Fill fuel tank with properly mixed fuel
2. Press primer bulb fully and slowly 10 times
3. Flip throttle lever to FAST and pull starter rope
4. Drain gas tank / Add fresh fuel mixture
5. Replace or clean the spark plug
6. Clean or replace spark arrestor
7. Move lever to the starting position
8. Pull the starter rope up to 10-15 times
9. Move the throttle control to the fast position and pull
the starter rope with out moving the red EZ-Fire
TM
lever
10. Refer to the Starting/Stopping
instructions
ACTION
1. Replace or clean the air filter
2. Drain gas tank / Add fresh fuel mixture
3. Adjust according to the Carburetor Adjustments
ACTION
1. Drain gas tank / Add fresh fuel mixture
2. Take to a Sears or other qualified service dealer for
carburetor adjustment
3. Clean or replace the air filter
4. Clean or replace spark arrestor
ACTION
1. Drain gas tank / Add fresh fuel mixture
2. Take to a Sears or other qualified service dealer
3. Replace or clean the spark plug
4. Clean or replace spark arrestor
5. Replace or clean the air filter
ACTION
1. Empty bag, as described in Empty the Vacuum Bag
2. Clear the blockage as described in Clearing a
Blocked Tube/Impeller
3. Clear the blockage as described in Clearing a
Blocked Tube/Impeller
4. Take the unit to a Sears or other qualified service
dealer
NOTE. For repairs beyond the minor adjustments
listed above, contact
your nearest Sears Parts &
Repair center (1-800-4-MY-HOME
®) or other qualified
service dealer for an adjustment.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents