MTD PR600N21RH Operator's Manual page 6

"FABRICTOP" GRASSCATCHERS
TO ASSEMBLEANDATTACHGRASS
CATCHER
• Putgrasscatcherframe into grassbag
with rigidpart of bagon the bottom,
° Slipvinyl bindingsover frame.
NOTE: If vinyl bindingsare too stiff, hold
them in warmwaterfor a few minutes. If
bag gets wet, let it dry beforeusing.
° Liftthe rear dooron the mowerhousing.
o ForHINGEBRACKETmountedcatcher,
place the grasscatcherframeonto the
formedtabs on the rear doorhinge
brackeL
° ForHANDLEBRACKETmounted
catcher,placeframe side hooksinto
slots in handlebracket&
° ForDOORPIVOTPINmountedcatcher,
place the grasscatcherframehooks
onto the door pivotpins,
° ForDOORSLOTmountedcatcher,
place the grasscatcherframehooksinto
the slots of the reardoor,
NOTE:The grass catcheris securedto the
lawn mowerhousingwhen the rear dooris
loweredontothe grasscatcherframe.
Frame
handle
HINGE BRACKET MOUNTED
Rear door
bracket
Grass
catcher
frame
Formed tabs
HANDLE BRACKET MOUNTED
Handle Rear Grass
catcher
handle
Catcher frame side hook
DOOR PIVOT PIN MOUNTED
Rear Grass
catcher
handle
_nyl Frame
bindings opening
AOAUTION: Under normal usage, the
catcher material is subject to deterioration
and wear and should, therefore, be
checked frequently for replacement. Any
replacement catcher should be checked to
ensure compliance with original manufac-
turer's specifications.
AOAUTION: Do not run lawn mower
without the discharge guard (rear door),
approved grass catcher, clipping deflector
or mulcher plate in place. Never attempt
to operate mower with the discharge guard
(rear door) removed or propped open,
\
Catcher frame hook
DOOR SLOT MOUNTED
Rear door slots
Grass
catcher
handle
6
\
Catcherframe hook