To Stop Engine - MTD 310 series Owner's Manual

Mtd
Hide thumbs Also See for 310 series:
Table of Contents

Advertisement

START ENGINE
and ENGAGE
BLADE
• Prime
engine
as instructed
in the separate
engine manual packed with your unit.
• Move throttle control lever all the way forward.
• Standing
behind the unit, depress
the blade
control handle and hold it against the upper
handle. See figure 12.
• Grasp starter handle and pull rope out slowly
until engine reaches start of compression cycle
(rope wilt pull slightly harder at this point). Let
the rope rewind slowly. Then, pull rope with a
rapid, continuous,
full arm stroke. Keep a firm
grip on starter handle. Return it slowly to the
rope guide. See figure 12.
• After engine
starts,
move throttle
control
to
desired engine speed. (Mower is designed
to
be operated at full throttle.)
NOTE:
If any problems are encountered,
refer to
the Trouble Shooting Guide.
Depress and Hold
blade control handle
Move throttle
control forward
I
Pull rope
Figure 12
TO STOP ENGINE
AND BLADE
• Release the blade control handle to stop the
engine and blade.
WARNING:
The blade continues to rotate
for a few seconds after the engine is shut off.
• Disconnect
the spark plug wire and ground it
against
the
engine
to
prevent
accidental
starting while equipment is unattended.
USING YOUR ROTARY MOWER
• Be sure that lawn is clear of stones, sticks,
wire, or other objects which could damage lawn
mower
or
engine.
Such
objects
could
be
accidently thrown by the mower in any direction
and
cause
serious
personal
injury
to
the
operator and others.
• For best results, do not cut wet grass because
it tends to stick to the underside of the mower,
preventing
proper discharge of grass clippings,
and could cause you to slip and fall. New grass,
thick grass or wet grass may require a narrower
cut. Blade speed
should
be adjusted
to the
condition of the lawn.
• For a healthy lawn, always cut off one-third or
less of the total
length of the grass.
Lawn
should be cut in the fall as long as there is
growth.
• This mower is designed to be operated at full
throttle to give you the best cut and do the most
effective job of bagging the cut grass.
WARNING:
if you strike a foreign object,
stop the engine.
Remove
wire from spark
plug, thoroughly
inspect the mower for any
damage,
and
repair
the
damage
before
restarting
and
operating
the
mower.
Extensive
vibration
of the
mower
during
operation
is an indication of damage.
The
unit
should
be
promptly
inspected
and
repaired.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

329 series510 series519 seriesYard machines 310 seriesYard machines 329 seriesYard machines 510 series ... Show all

Table of Contents