Preliminary Instructions - Makita LS1400 Instruction Manual

22.DISCONNECT TOOLS before
s ervicing; when changing accessories such as blad,
bits, cutters, eta,
23. REDUCE THE RISK OF UNINTENTIONAL STARTING. Mak_ sure switch is in (
position before plugging in.
24. USE RECOMMENDED ACCESSORIES. Consult the owner's manual for recommend
accessories. The use of improper accessories may cause risk of injury to persons.
25. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if
cutting tool is unintentionally contacted.
26. CHECK DAMAGED PARTS Before further use of the tool, a guard or other part t
is damaged should be carefully checked to determine that it will operate properly :
perform its intended function - check for alignment of moving parts, binding of rr
ing parts, breakage of parts, mounting, and any other conditions that may affect
operation. A guard or other part that is damaged should be properly repaired
replaced.
27. DIRECTION OF FEED. Feed work into a blade or cutter against the directio_
rotation of the blade or cutter only.
28. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. D
leave tool until it comes to a complete stop.
PRELIMINARY INSTRUCTIONS
Your electric tool is precision built lind manufactured to satisfy the highest,lllrtdaPds For rnaxm
performance, lot+ e Ioo_ I;fa, ;Ind your sJ+tety, follow these inslructions carefully,
VOLTAGE WARNtNG: Before ¢onnectin e Ihe tool to a power source (receptacre, cutter, etc
sure (he ¥ollaee supplied _s the same as that specifi0d on thql nameplate ol the tool. A power $_
with vole=ee greater than that specified for the toot can result in SERIOUS INJURY to _he user
well as damagm to the Iool. If in dOUbt, OONOTPLUG _N THE TOOL. Usinga power source
voltage less th_ln 1he nameplate rit[n e is harmful to the motor,