Maintenance; Carbon Brushes; Oiling; Optional Accessories - Makita LS1400 Instruction Manual

13. Maintenance
• Carbon brushes
Replace carbon brushes when they wear
down to about 6mm(1/4") or spark-
ing will occur. Both brushes should be
changed at the same time.
•Oiling
Clean the tool thoroughly after use.
Apply oil to all sliding surfaces, the base and saw blade as a rust inhibitor.
Optional accessories
CAUTION: The use of any other accessories not specified in this menual might be hazardous,
• Holder set (with wing bolts)
(Part No. 191239-7)
Saw blades
• Carbide-tippedsaw bled=
• Vise essembly
IP,_rl No. 133101-0) •
Fas • ,smoother ongersawn9 w
hou
blade sharpening
cuts wood, drywe_k plastics, hard wood, etc.
Fat #lurnlnum cutting
• Combinat;on laW blade For rip and cross-cut work.
Has fewer teeth than cross-cut for faster cuttirlg,
NO D*a_e_er Imml Hole diz= Ir_m] NO leezh part NO