Section 3: Know Your Chipper Shredder V Acuum - MTD Series 020 Operator's Manual

NOTE:
The safety switch button attached to the
mounting bracket must be fully depressed by the front
tab on the bag handle when securing the bag or the
engine will not start. See Figure 4.
Front Tab
/ /
Figure 4
Attaching TheBlowerChuteof
equipped)
• Grasp blower chute with one hand and slide locking
rod of the mounting bracket with other hand toward
the engine. Use end of the mounting bracket as
leverage when sliding the locking rod. See Figure 5.
• Slip blower chute over rim of the discharge opening
and release locking rod to secure chute in place.
Make sure safety switch button is fully depressed
by the front tab on the blower chute. See Figure 5.
• Raise the nozzle height to the highest setting when
using the blower chute. Refer to nozzle height
adjustment in the OPERATION section.
Front / Blower
Tab\ / Chute
Rod
Figure 5
SECTION 3: KNOW YOUR CHIPPER SHREDDER V ACUUM
Read this operator's manual and safety rules before operating your chipper shredder vacuum. Compare the
illustration in Figure 6 with your unit to familiarize yourself with the location of various controls and adjustments.
Save this manual for future reference.
Blower Chute
(optional)
/
Bag /
Chipper
Bag Handle
Plug
Nozzle Height
Adjustment Lever
/
/
/ Nozzle
Figure 6