Philips 34PW850H Directions For Use Manual page 48

F_ffow these simple steps to have your 1V
mote search for the code it needs to work
the jhnetions qf your accessory device, Please
read through the steps once bef!_re peffbrming
them.
NOTE: 7he £_areh method works only with
devices equipped with channel display #Mica-
tors or channel display capability,
Press the POWER tmttan on l_he
device your are atlempting to program
te turn it ON,
Slide the TWVCRiACC mode switch
to lbe VCR position if you're setting
up a VCR or to the ACC position if"
you're setting up any other accessoq
device.
Press the REC(ord)iSAP and
SOUND buttons simultaneously and
hold lbem down. l-he device will begin
m Change Channels al_r ¢he remote
identifies lbe correct code.
When the channels start to change,
release the REC(ord)/SAP and
SOUND buttons.
NOTE: Don't let tShedevice scan up more
lban five Channels. If"you do, [he remote con-
tmI may pass up the correct code, and another
two-minum search cycle will have to be done.
If no Channel Change happens wffhin two
minutes, repeat steps 1-4. Should a channel
Change still not ocm:tr, the remote will not
work the desired device.
Don't let [he device scan up more [han five
Channels. If you do, lbe remote may pass up
_he fight code, and anolber two-minute
search eyrie will have to be done.
If no Channel Change happens wi[hin two
minutes, repeat steps t-4. Shmild a Channel
Change still not occur, t£heremote control
will not work lbe desired device.
It is recommended lShatyou use Philips
brand external accessob _devices with your
Philips television te insure proper remote
control f_mctions, lfyou are using Philips
brand accessow devices, your remote con-
trol ShoOd be read}* te use w*it{h Oese
devices.
Satellite Receiver
(_tble Converter
C_ C> <Z) C>
4)®®
\ J
PtI_LIP$
48