Philips 34PW850H Directions For Use Manual page 27

7"7w Active Control monitors and adjusts
I incoming video signals to helpprovide the
best picture quality.
When you choose to turn the Active Control
ON, the picture sharpness and noise reduc-
tion are controlled automatically. Active
Control adjusts' these picture settings continu-
ously and automatically.
NOTE: Active Control is not available jbr
signals connected to the AV4 inputs.
Press the MENU button on the remote control to show the on-screen
lnenu.
Press the CURSOR DOWN button
twice to highlight FEATURES.
Press the CURSOR RIGHT button
and the menu will shift to the left.
Press the CURSOR DOWN button
repeatedly until the ACTIVE CTRL
(control) is highlighted.
Press the CURSOR RIGHT or CUR-
SOR LEFT button repeatedly to tog-
gle the ACTIVE CONTROL ON or
OFF.
Press the STATUS/EXIT button to
remove the menu from the screen.
You can also press the ACTIVE
CONTROL button on the remote
control to toggle the ACTIVE CON-
TROL ON or OFF.
Toggle the ACTIVE CONTROL ON with
the remote control and a screen display will
appear showing the Active Control at work.
You will see the sharpness and noise reduc-
tion settings changing to provide the best
possible piclure quality.
• PICTURE TIHER
• SOUND ACTIVE CTRL
AutoLock
• INSTALL CLOSED CAP
EORMAT
PHiUPS
FEATURES
TIHE
• ACTIVECTRL START TIHE
• AutoLock STOP TIHE
• CLOSED CAP CHASNEL
• FORMAT ACTIVATE
E
FEATURES
• T[HER
• AutoLock
• CLOSED CAP
• FORMAT
8
ACTIVE CONTROL ON
SHARPNESS 56
NOISEREDUCTION 20
ACTIVE CONTROL Off
27