Sound Menu - Philips FTR9964 Owner's Manual
32" flattv
Hide thumbs
Also See for FTR9964:
- Owner's manual (33 pages) ,
- Specification sheet (2 pages) ,
- User manual (37 pages)
Table of Contents
Advertisement
@
@
@
Sound
menu
Volume
This control allows you to adjust the volume level of the sound from the
speakers.
Bass
Bass attenuates or amplifies the low-frequency response of the sound from
the loudspeakers.
Treble
Treble attenuates or amplifies the high-frequency response of the sound
from the loudspeakers.
Sound mode
This control allows you to switch between mono and stereo sound.
Note; Bass,Treble and Sound mode will not be available in VGA loop through mode,
i e. when a TVreceiver box is connected to the monitor and a VGA source is
selected.
Setup
menu
Language
Use the cursor down to select Language.
Press the cursor right to enter the list of selectable languages.
Use the cursor up/down to scroll through the list and to bring up other
languages which are not displayed on the screen at present.
Note: Only with the US English language, the menu items will be displayed with
additional icons
Power savings
This control allows you to overrule the automatic power savings feature.
In case Power savings is switched Off, the power always remains on until the
monitor is forced to standby.
O
Use the cursor down to select Power savings.
Press the cursor left/right to select On or Off.
AV3
This control allows you to set the AV3 input to HD-RGB,YCbCr
or HD-
YPbPr.When having selected Auto, the monitor makes the selection
automatically between YCbCr, HD-YPbPr or HD-RGB.
See also p. 9, Equipment with Component Video Output connectors.
Use the cursor down to select AV3.
Press the cursor right to enter the list with options.
Press the cursor up/down to select one of the options.
VGA2
This control allows you to select whether to set theVGA2
connector as
input, output or even HD-input.
Use the cursor down to select VGA2.
Press the cursor right to enter the list with options: VGA IN, VGA OUT or
HD IN.
Press the cursor up/down to select one of the options.
Note:AV3 and VGA2 will not be available in VGA loop through mode, i e when a TV
receiver box is connected to the monitor and a VGA source _sselected.
Use of the menus
Advertisement
Table of Contents
