Sound Menu - Philips FTR9955 User Manual

Color enhancement (not available for HD sources)
When activated, this feature automatically controls green
enhancement and blue stretch. It makes the colors more
vivid.
&
Press the cursor down.
é
Press the cursor right to enter.
"
Select or in order to activate/de-activate Color
On Off
Enhancement with the cursor right.

Sound menu

Sound
TV
Volume
Treble
Bass
Balance
Headphone volume
Sound mode
Alt Audio
Audio only
Auto sound
Select the menu items in the Sound menu with the cursor
up/down and adjust the settings with the cursor left/right.
Remember, control settings are at normal mid-range levels when
the bar scale is centered.
Volume
This control allows you to adjust the volume level.
Treble
Treble attenuates or amplifies the high-frequency response of
the audio output signal.
Bass
Bass attenuates or amplifies the low-frequency response of the
audio output signal.
Balance
This control allows you to adjust the balance of the right and
left speaker's sound output.
Auto picture
This menu item performs the same as the
item on the remote control. See Use of the Remote
Control, p. 7.
&
Press the cursor right to enter the list.
é
Select a predefined picture setting with the cursor
up/down.
"
Press the cursor left to return to the picture menu.
Auto picture settings will be set to
settings are changed manually: contrast, brightness, color,
sharpness, dynamic contrast, color enhancement or DNR.
Picture format (not selectable for HD sources)
This menu item performs the same as the q button on
the Remote Control. See Use of the Remote Control, p. 5.
Headphone volume
This control allows you to adjust the volume level of the
headphone.
Sound mode
Surround Mode can only be selected when the sound of the TV
channels is stereo.
When is selected, it seems as though the
Sound mode On
loudspeakers are spread further apart from one another.
Alt Audio
When you tune a channel where SAP (Second Audio Program)
is available, you can toggle between
Press the cursor right to make your preferred audio selection.
If SAP is not available, only Main is selected.
Audio only
This control enables you to blank the TV picture if the monitor
is used as center speaker in a configuration with an audio
receiver.
Select to only hear the sound and to switch off
Audio only On
the picture.
Auto Sound
This menu item performs the same as the
the remote control. See Use of the Remote Control, p. 7.
&
Press the cursor right to enter the list.
é
Select a predefined sound setting with the cursor up/down.
"
Press the cursor left to return to the sound menu.
PICTURE
if the following
Personal
and .
Main SAP
item M on
SOUND
Use of the menus
a
13