Advertisement
he picture for the TV can come
rough either the ANTENNA
plug
or the A UDIO/VIDEO
INput jacks (on
the rear of the TV). The Picture
Source control simply tells the TV
which one of these picture sources it is
to show on the TV screen.
_
Select PICTURE SOURCE
SELECT control.
With the FEATURES
MENU on
screen, move the RED highlight
with
the MENU 4-) buttons. Then press
the MENU (M) button.
<_
Press the MENU AY
buttons to
move the RED highlight. Press the
MENU button to turn the desired PIC-
TURE SOURCE control ON (t,").
ANTENNA-
for a picture signal
coming from the ANTENNA
plug on the TV.
VCR/AUX-
for a picture signal
coming from the Video Input
jack on the rear of the TV.
<_
Press the STATUS button
clear
to
--
Q
--
Remember. t
The VCR/AUX
TV screen will
be blank unless a
signal source is
connected to the
Video Input jack
on the rear of the
TV. (See page 26
for details).
n optional RF S_itcher is available
.that will allow an Antenna/Cable TV
signal and another video accessory
(VCR, Video Disc Player, etc.) to be
connected _o the TV at the same time.
Connection instructions are given with
the accessory RF Switcher, but be sure
to turn the TV' s power OFF (and
unplug its AC power cord) when con-
:necting the RF Switcher to the RF
Switch Input jack on the rear of the TV.
iReplug the TV's AC Power Cord into
the wall outlet and turn the TV ON. The
TV' s Picture Source Menu will now
show an Accessory Signal Source option
available for selection.
The accessory RF Switcher can be pur-
chased or ordered from your dealer. If
your dealer does not carry the accesso-
ry, call the Information Center number
(listed with your warranty)for further
assistance.
m
_ATU_E t,4_o --
3DF_
qf_
Advertisement
