Philips 55PW9383 Directions For Use Manual page 28

Using the Remote Control
3
Press the Program List button on
the remote control to display a list of
channel numbers and their names (see
the "Tuner Mode" "Auto Program,"
"Channel Edit," and "Name" sections
on pages 5 and 7 in the Quick Use
and Setup Guide that came with your
TV for proper setup).
You can also access the Progrmn List
by pressing the button in the center of
the Cursor Ring. Each channel will
appear as a selectable item. The cur-
rent channel will be highlighted by
default. Only five channels will be
shown in the list at one time.
Press the CURSOR RING UP or
DOWN to go through the list and and
highlight a channel.
Press the CURSOR RING RIGHT
to tune to the highlighted channel.
Channels marked "Skipped" in the
"Channel Edit" control will not
appear in the list. Any channel that is
being blocked by AutoLock
TM
will
appear with a padlock icon to indicate
that the channel is not viewable.
®®®®
®®®
®®®
®®®
A padlock image will appear to the
right of a channel or signal source
that is being blocked by AutoLock
TM.
You can press the A/CH button on your
remote control to go back and forth between
the current channel and one previously
watched channel.
®®®®
® ® ,,.,=®
15 o' 'O'ii
®®®
®®®
®®®
28
Watch channel
[]
Change channel
'Watch new channel
Press A/CH button
to return to previously
watched channel