Advertisement
--__ _kTOTE:
lf you went through
1 "_ Setup (in your Quick
Use
Guide),
this task has already
been
completed
for you.
Your TV can automatically
set
itself for local area (or Cable TV)
channels.
This makes it easy for
you to select only the TV stations
in your area when the CH(annel)
AV
buttons
are pressed.
<_
Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word PROGRAM with the
TV's on-screen arrow.
<__
Press the (+) button (on the
TV or the remote)
to PROGRAM.
_
Press the (+) button
again
to
slart the TV search for area chan-
nels.
Flashing
channel
numbers
will
count upward
on the screen as the
TV looks for channels
to "ADD".
_ress any button (on the TV or
remote) to stop the channel
search
at any time. When the channel
search is completed
the TV will
return to the last viewed channel.
<_
Press STATUS
button to clear
i
the screen.
Try it out. Press CHAN-
a NEL ••
buttons and see
which channels have been added.
Remember,
if you want to drop any
unwanted channels from the TV's
memory, see the next page on how
to "Manually"
add and delete chan-
nels.
Note: As the TV searches for chan-
nels to "ADD" into memory the on-
screen display may move (or jitter
lightly). This is normal operation
and does not indicate a need for ser-
vice.
iiiiiiiiii!iiiiiiiiiiiii_:
"RED" channel numbers have been
added to the TV's memory.
"WHITE"
channel numbers are not
present in the TV's program memory.
i
The TV screen will be blocked off
until the search for channels is
done.
Advertisement
