Advertisement
N_h
w that you have looked up
e two-digit
Remote
Code
Number for your brand of Cable
Converter
(on previous
page),
you are ready to follow
the four
simple steps below.
Please read through
steps 1-4
before
beginning.
Press and release the REC
(RECORD) button.
Within thirty seconds after
releasing the REC button, press
and release the CBL System
button.
Within thirty
seconds
after
releasing
the CBL System
but-
ton, ENTER
THE
TWO
DIGIT
CODE
NUMBER
for
Ihe desired
Converter.
The
remote
is now ready to send
commands
to the Converter.
_4j
Point the remote at the
Converter.
Press the POWER
button on the remote to turn the
Converter
ON.
Try it out. The Channel
J and POWER buttons on the
remote should now operate the
Converter.
Remember, if this doesn't work
the first time, repeat steps using
the same remote code number.
If after a second try the remote
does not operate your Converter,
and there are more code numbers
listed for your brand Converter,
use the next listed code number.
If after repeated
attempts
the code
number
method
does not work
yc,ur Converter,
try. the "CON-
VERTER
SEARCH"
method on
page 28.
Advertisement
