Advertisement
OeTE: If you went through
tup (in your Quick Use
Guide),
this task has already
been
completed
for you.
Your TV can automatically
set
itself for local area (or Cable TV)
channels.
This makes it easy for
you to select only the TV stations
in your area when the CH(annel)
• • buttons
are pressed.
c-fi-ff m
<_
Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word PROGRAM with the
TV's on-screen arrow.
<_
Press the (+) button (on the TV
or the remote) to PROGRAM.
<_
Press the
button
to
(+)
again
start the TV search for area
channels.
Flashing channel numbers will
count upward on the screen as the
TV looks for channels to "ADD".
Press any button (on the TV or
remote) to stop the channel search
at any time. When the channel
search is completed the TV will
return to the last viewed channel.
_
Press STATUS button to clear
I the screen
I@
Try it out. Press
a CHANNEL &V buttons and
see which channels have been added.
Remember, if you want to drop any
unwanted channels from the TV's
memory, see the next page on how to
"Manually" add and delete channels.
Note: As the TV searches for
channels to "ADD" into memory the
on-screen display may move (or
jitter slightly). This is normal
operation and does not indicate a
need for service.
"RED" channel numbers have been
added to the TV's memory,
"WHITE" c "lumnel numbers are not
present in the TV's program memory.
PRESS*TO
AUTO PROGRAM
CHANNELS
The TV screen will be blocked off
until the search for channels is
done.
I
Advertisement
