Fisher & Paykel DishDrawer DD24ST Series Installation Instructions Manual page 7

(2,1) -2- 599754C DD24S TALL installA2 USCA.indd 15/4/09 2:34:43 PM
(2,1) -2- 599754C DD24S TALL installA2 USCA.indd 15/4/09 2:34:43 PM
10
MOVE INTO THE CAVITY
3
If top mounting
brackets are being
used, ensure they're
optional
securely fitted before
(x2)
sliding product into
cavity.
2
11
SECURE THE DRAWER
Open the drawer halfway.
1
Using a flat-bladed
screwdriver, prize the plastic
gray plug out of the trim
moulding.
4
OPTIONAL
¾ "
max. (19 mm)
4
optional
3
1
1
Ensure hoses and cord
are not kinked or twisted.
Using a small Philips screwdriver,
screw through the trim moulding,
securing the side mounting
bracket to the cabinetry. Do not
damage the rubber trimseal.
3
Replace the plastic
gray plug back into
the trim moulding and
ensure the trimseal is
facing forward.
Repeat for all four brackets.
10
SECURE THE DRAWER
The product has three
pairs of fixing points:
Ensure the sound insulation is
repositioned correctly.
a pair of formed
brackets on the
chassis side
11
REFIT THE DRAWER
Ensure the drawer clips on
both sides are reset.
5
2
4
Ensure the drawer is
now rotated
1
clockwise back.
max.
optional
a pair of fixing
1 2
holes on the bottom
Before refitting the drawer,
4
ensure the hoses are not
twisted and the latches at
the rear of each drawer
runner are facing forward.
2
a pair of optional
brackets on the top
¾ "
(19 mm)
3
3