Fisher & Paykel DishDrawer DD24ST Series Installation Instructions Manual page 6

(1,2) -2- 599754C DD24S TALL installA2 USCA.indd 15/4/09 2:34:43 PM
(1,2) -2- 599754C DD24S TALL installA2 USCA.indd 15/4/09 2:34:43 PM
RECOMMENDED METHOD - SECURE WITHOUT
DRAWER REMOVAL
8
ROUTE THE HOSES
Tie together to avoid kinking.
9
ATTACH SIDE MOUNTING BRACKETS
'B'
'B'
'B'
'A'
'A'
'A'
The mounting slots are in pairs, one
on each side diagonally across the
product. 'A' bracket must match 'A'
slot and 'B' bracket must match 'B' slot.
(FRAMELESS CABINETRY ONLY)
OR
1
Clip all four side mounting
brackets into their slots
using a flat-bladed
'A'
screwdriver. Ensure they're
securely fitted before
sliding product into cavity.
'A'
'B'
'B'
8
ROUTE THE HOSES AND MOVE INTO CAVITY
Tie together to avoid
kinking
If top mounting
brackets are being
used *, ensure
they're securely
fitted before
sliding product
into cavity.
(x2)
2
optional *
* If cavity bracket for 18
cavity is fitted, the top mounting
4
brackets cannot be used.
9
REMOVE DRAWER
1
'A'
2
'B'
3
ALTERNATIVE METHOD -
SECURE BY DRAWER REMOVAL
OR
5
3
7⁄8
"(480 mm)
Ensure the drawer is
removed and then rotated
counter-clockwise to
prevent kinked hoses.
3⁄16
1 "
(30 mm) 30 mm
2
1
3
Ensure hoses and
cord are not kinked
or twisted.
4
5
5