Dispenser; Freezer - GE Profile 26 Owner's Manual And Installation Instructions

Screen functions.
GEAppliances.com
_ FREEZER Button 0 Upand DownArrows
to settemperature
'M
WATER FILTER: GOOD
Home Screen
FREEZER Temperature:
To change the freezer compartment temperature, press the FREEZER
button and use the UPor DOWNarrow keys until the desired temperature
appears on the screen. Press SAVEto confirm the selection. The control
will display both the actual and set temperature until the set temperature
is reached. The actual temperature may vary slightly from the SET
temperature, based on usage and operating environment.
Each time you adjust the controls, allow 24 hours for the refrigerator
to reach the set temperature.
SAVE Button
UpandDown Arrows
tosettemperature 0 FRESH FOOD B utton
WATER FILTER: GOOD
FRESH FOOD Compartment Temperature:
To change the fresh food compartment temperature, press the FRESH
FOODbutton and use the UPor DOWNarrow keys until the desired
temperature appears on the screen. Press SAVEto confirm the selection.
The control will display both the actual and set temperature until the set
temperature is reached. The actual temperature may vary slightly from
the SETtemperature, based on usage and operating environment.
Each time you adjust the controls, allow 24 hours for the refrigerator
to reach the set temperature.
SAVE Button
12:00 PM
WATER FILTER: GOOD
DISPENSER Button
WATER o ption c hosen
Dispenser
LIGHT Button
12:00 PM [ WATERF, LTER:GOOD
DISPENSER:
The refrigerator can dispense water, crushed ice or cubed ice through
the dispenser. To make a selection, press the DISPENSER button and
choose WATER, CRUSHED ICE or CUBED ICE After the selection has
been made, press a glass against the dispenser paddle.
NOTE."The DISPENSER button is available from almost every feature
screen.
Dispenser LIGHT."
The dispenser light default setting is OFF When the dispenser paddle
is pushed, the light automatically comes on (off after 5 seconds when
pad is released). To turn the light on manually, press the LIGHTbutton.
The dispenser light will stay on until the LIGHTbutton is pressed again.
LOCK:
To prevent accidental use of the control or dispenser, the control is
equipped with a lock feature. When locked, the dispenser and LCD
functions are not available. Press and hold the LOCKbutton for
3 seconds to lock or unlock the dispenser.
LOCK
I_ LOCK Button
Press andHoldfor
3 seconds to Lock
Locked Unlocked or Unlock
This product includes software which is based in
part on the work of the Independent JPEG Group