GE Profile 26 Owner's Manual And Installation Instructions page 12

About the control with temperature settin s for non-LCD models.
Model 26
GE Adora 29
!
!
(Hold 3 sec
for Turbo Freeze)
(Held 3 sec
to Reset Filter)
TURBO FREEZE TURBO COOL I '_'_'_' I
U ht ON/OF_
(H_c_3 secondst
(Hold 3 sec
for Turbo COOl}
RESETF}LTER CUBED CRUSHED WATER
_4eld 3 sec
to Lock Contrel)
Model 29
Energy
Saver
C_22D
Adjust
Freezer
IHold 3 seconds
for Turbo Freeze)
(ce &
Water
(Hold 3 sec
to Reset Filter)
Alorml
Turbo Freeze Turbo Cool Light
Light ON/OFF
(Ho_d 3 s_ands_
Adjust
RefrigerQtor
(Hold 3 seconds
for Turbo Cool)
Ice Off/
Lock
Reset Filter Cubed Crushed Woter
IHold 3 sec
to
Lock
Contro)}
J
NOTE: The refrigerator is shipped with protective film covering the temperature controls, if this film was
not removed during installation, remove it now
The temperature controls are preset in the f_ctory at 38°F for the refrigerator compartment and -2°F for
the f_'eezercompartment, Allow 24 hours for the temperature to stabilize to the preset recommended settings,
The temperature controls can display both the SET temperature as well as the actual temperature in the
refi'igerator and freezer, Theactual temperature may vary slight s from the SET temperature based on usage and
operating environment,
ADJUST ]
REFRIGERATORJ
(Hold 3 sec
for Turbo Cool)
ADJUST
FREEZER
1
(Hold 3 sec
for Turbo Freeze)
Changing the Temperature
To change the temperature, press and
release the ADJUST FREEZERor ADJUST
REFRIGERATORpad, The display will
show the actual temperature, To change
the temperature, tap either the ADJUST
FREEZERor ADJUST REFRIGERATORpad
until the desired temperature is displayed,
Once the desired temperature has been
set, the temperature display will return
to the actual refrigerator and freezer
temperatures after 10 seconds, Several
adjustments may be required,
Each time you adjust controls, allow
24 hours for the refrigerator to reach
the temperature you have set,
12