Air Direction; Controls; Vent Control - GE Zoneline 2500 Owner's Manual And Installation Instructions

Otherfeatures yourZoneline may have.
Ventilation Control
The xentilation control lexer is located at the
upper left side of the Zoneline unit, behind the
I'OOIll
cabinet,
NOTE:Thevent door shipping hardware must be
removed before using the vent control lever.
See the Installation Instructions in this manual.
X,_q_en set at CLOSE, OlflV the air inside the
room is circulated and filtered.
_,_q_en set at OPEN, some outdoor air will be
drawn into the room, This will reduce the
heating or cooling efficiency,
Eaergy Tip: Keep the vent control at CLOSE.
The
room
air will be filtered and circulated,
Vent
control
(Pull l ever
through
labelto
operate)
ToRemovethe RoomCabinet
Additional controls are located behind the
I'OOIll
cabinet,
Te remeve: Pull out at the bottom to release it
fl'om the tabs (1). Then lift up (2).
To replace: Place the tabs o_er the top rail ( l ).
Push imvard at the bottom tmtil it snaps into
place (2).
Air Direction
To
a(!iust
the air direction, remove the room
cabinet. Renlove the 7 louver screws that
hold
the louver insert in place. Flip the louver insert
180_ replace the screws
and the room
cabinet.
Louverscrews
Remove the room cabinet and flip the louver
insert to change the air direction.
4
Louver s crews