GE GFDN240 Owner's Manual page 8

About the dryer control panel.
Sensor Dry "Level"
The sensor continuously monitors the (]mount of moisture in the Io(]d. When the moisture in your clothes re(]ches your
selected dry level, the dryer will stop.
_IR_: Sensor dry "LEVEL" only works for COTTONS,NORMAL/MIXED LOAD, ACTIVE WEAR,DELICATE& and SPEED
Dry "Temp"
You c(]n ch(]nge the temper(]ture of your dry cycle.
ANTI-BACTERIAL This option m(]y only be used with COTTONSor NORPIAL/PIlXED LOAD cycles. This option
reduces (on some models) cert(]in types of b(]cteri(] by 99.9%, including: St(]phylococcus (]ureus,
Pseudomon(]s (]eruginos(] (]nd Klebsiell(] pneumoni(]e*. The (]nti-b(]cteri(]l process occurs when
high he(]t is used during (] portion of this drying cycle.
NOTE: Do not use this cycle on delic(]te f(]brics.
* The Anti-B(]cteri(]l Cycle is Certified by NSFIntemotion(]l (formerly Notional Sanitation Founda-
tion) to NSF Protocol P!54 Sonitizotion Performance of Residenti(]l Clothes Dryers.
NSF Protocol P154
Sanitization Performance ot
Residential Clothes Dwers
HIGH For regul(]r to he(]vy cottons.
MEDIUM For synthetics, blends (]nd items I(]beled perm(]nent press.
LOW For delic(]tes, synthetics (]nd items I(]beled Tumble Dry Low.
EXTRA LOW For lingerie (]nd speci(]l-c(]re f(]brics.
START
Press to st(]rt (] dry cycle. If the dryer is running, press it once (]nd it will p(]use the dryer.
Press it (]g(]in to resume the dry cycle.
Ply Cycle
Set up your f(]vorite combination of settings (]nd s(]ve them here for one touch rec(]ll.
These custom settings c(]n be set while (] cycle is in progress.
To store a PlY CYCLEcombination of settings:
1. Select your drying cycle.
2. Ch(]nge DRY"TEPIP", (]nd SENSORDRY "LEVEL" settings to fit your needs.
3. Select (]ny drying OPTIONSyou w(]nt.
4. Press (]nd hold the _ p(]d for three seconds to store your selection. A beep will sound (]nd the p(]d will
light up.
To recall your stored PlY CYCLEcombination:
Press the PlY CYCLEbutton before drying (] Io(]d.
To change your stored PlY CYCLEcombination:
Follow steps 1-4 in "To store a PlY CYCLEcombination of settings".
"CLEAN LINT FILTER" (message)
(This mess(]ge represents only (] reminder (]nd does not (]lw(]ys (]ppe(]r when filter needs cle(]ning. The filter should be
cle(]ned (]fter every drying cycle is complete.)
This mess(]ge will dis(]ppe(]r (]fter the STARTbutton is pressed. Even though you m(]y h(]ve (]lre(]dy cle(]ned the filter
(before or (]fter the POWER button h(]s been pressed), the "CLEAN LINT FILTER" mess(]ge will still be displ(]yed until
the STARTbutton is (]ctiv(]ted.