GE GFDN240 Owner's Manual page 26

Before you call for service...
PROBLEM Possible Causes What To Do
Small amount of water
on floor in front of dryer
Inadequate load size for steam
cycle selected, excess steam
condenses inside cabinet and
leaks out
. If using the STEAMDEWRINKLEcycle, manually reduce cycle
time. If using the STEAMREFRESH cycle, add more garments
to the load.
Water on floor in back
of dryer
Loose water hose connection to , Tighten connection.
valve
Hose missing rubber washer at . Install rubber washer provided with hose.
connection with valve
Water drips from door
when opened after
a Steam Cycle
Steam condenses on inner door . This is normal.
Cannot see steam at
beginning ofcycle
Steam released at different
time in cycle
, This is normal.
Cannot see steam at any The steam nozzle might be
time during the cycle clogged with debris from your
water supply
, Call 800.GE.CARES t o order nozzle replacement kit WE251v171
or to request a service technician to replace this for you.
Garments still wrinkled
after steam cycle
Too many garments
m
, Loud fewer garments; manually increase time.
Dryer continues to
tumble after display
says Complete
Extended Tumble was selected
. Ensure EXTENDED TUMBLE option is not selected. For the
STEAM REFRESHcycle, EXTENDED TUMBLE will automatically
be turned on and cannot be turned off.
26