GE JGB870 Owner's Manual And Installation Instructions page 23

GEAppliances.com
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour military
time clock or black out the clock display,follow
the steps below.
[] Touch the Bake and Warm pads at the
same time for 3 seconds until the display
shows SF.
[] Touch the Clock pad once. The display will
show 12 hr. If this is the choice you want,
touch the Start pad.
Touch the Clock pad again to change
to the 24-hour military time clock. The display
will show 24 hr. If this is the choice you want,
touch the Start pad.
Touch the Clock pad again to black out the
clock display. The display will show OFF. If this
is the choice you want, touch the Start pad.
NOTE:If the clock is in the blackout mode, you
will not be able to use the Delay Start function.
ZZZZZZZZZ
BAKE + WARM
, TIME
l S..T
Cook and Hold
Your new control has a cook and hold feature
that keeps cooked foods warm for up to 3
hours after the cooking function is finished.
This feature can only be used when timed
cooking.
To activate this feature, follow the steps below.
[7] Touch the Bake and Warm pads
at the same time for 3 seconds until the
display shows SF.
Touch the Cooking Time pad. The display
will show Hid OFF.
Touch the Cooking Time pad again to
activate the feature. The display will show
Hid ON.
[] Touch the Start pad to activate the cook
and hold feature and leave the control set
in this special features mode.
WARN 4" BAKE
--
coo.
l HE
START
Tone Volume (on some models)
This feature allows you to adjust the tone
volumes to a more acceptable volume. There
are three possible volume levels.
Touch the upper oven Warm and Bake
pads at the same time until the display sh
ows SF.
Touch the Cook Time pad. The display
shows 2 Beep This is the middle volume
level.
Touch the Cook Time pad again. The
display will show 3 Beep.This is the
loudest volume level.
Touch the Cook Time pad again. The
display will show I Beep. This is the
quietest volume level.
@
[]
Choose the desired sound level (1 Beep, 2
Beep, 3 Beep).
Touch the Start pad.
23