GE Monogram Owner's Manual page 8

Temperature Controls
Built-In Refrigerators
FREEZER FRESH FOOD
PresetSettings:
Allow 24 hoursto reachthese presettemperatures.
Temperature
controls
The temperature displag shows the actual
temperature of the freezer and fresh food
compartments. The actual temperature will varg
from the set temperature based on factors such
as door opening, amount of food, defrost cgcling
and room temperature.
NOTE: Frequent door openings or door left open
for periods of time mag increase the internal
temperature of the freezer and fresh food
compartments temporarilg.
To turn off the cooling sgstem in both
the freezer and fresh food compartments, press
either (2) pad until both displags show OFF.
To turn the cooling sgstem on, press either
(_) pad. The preset temperatures of 0°F and S7°F
will appear in the displag.
To check the current temperature setting
for the fresh food or freezer compartment,
press the (2) or (_) pad once. After 5 seconds,
the displag will return to the actual temperature.
To change the temperature settings, press
the _(.2) o r (_ pads to desired temperature set
point for fresh food and freezer separatelg.
Allow 24 hours for the refrigerator to reach
the temperature gou have set.
Fresh Food
Freezer
Temperature Ranges
Low High
34°F 45°F
1°C 7°C
-6°F +6°F
-2!°C -!4°C
NOTE:Setting the controls to OFF stops
cooling, but does not shut off electrical power
to the refrigerator.
Changing
displag
temperatures
from °F to °C
To change the temperature displag
between Fahrenheit and Celsius, press
Temp Display °C/°F.
Door
alarm
To turn the Door Alarm feature on, press
DOOR ALARM once. The ACTIVE light will come
on. To turn it off, press it again.
On models with a dispenser, the Door Alarm
feature is located on the dispenser panel on
the front of the freezer door.
When the DOOR ALARM
is active, the alarm will flash
and beep if gou keep the door
open for more than 2 minutes.