Advertisement
Gauge capacity
Anvils
Gauge Resolution
Power Required
Probe Depth
Overall Length
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Write the product's serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
warnings and safEty prEcautions
Keep the work area well lit and uncluttered: dim and messy work areas invite
1.
possible injuries.
2.
Keep tools clean.
dirt, or other contaminants that may foil an accurate reading. Use only clean, soft
rags to wipe down the face of the tool.
3.
store and use only in dry locations.
wear ansi-approved safety goggles during set up and use.
4.
check for any broken or damaged parts and any other conditions that may
5.
affect the Electronic bore gauge's operation. Replace or repair damaged or
worn parts immediately using only a qualified repair facility.
do not modify or force this product.
6.
7.
Keep out of reach of children.
swallowed.
warning: the warnings, precautions and instructions discussed in this
8.
instruction manual cannot cover all possible conditions and situations that
may occur. It must be understood by the operator that common sense and general
caution are factors that cannot be built into this product but must be supplied by
the operator.
for technical questions, please call 1-800-444-3353.
SKU 94873
spEcifications
1.4~6" Inside Diameter
1.4", 1.6", 1.8", 2.0", 2.2", 2.4", 2.6", 2.8", 3.0", 3.2", 3.4", 3.6", 3.8" and 4.0"*
Includes .1", 0.05", 0.02" and 2" anvil extensions
*Not actual adapter lengths, but the lengths that the anvils make the device's measuring surfaces.
0.0005"/ 0.002 mm
One Button Battery 3 VDC CR2032 (included with spare)
6" (152mm)
13-1/2" (Gage Only: 1-1/2" X 2-1/2")
save this Manual
The Electronic Bore Gauge should be kept free of any grease,
Use the tool for intended purposes only.
Contains small parts that can be choked on or
Page 2
Advertisement
