Advertisement
SpecificationS
Power Supply
Battery Life
Display Scales
Scale Graduations
Accuracy
Measuring Positions
Unit Weight
Range
Ambient
Temperature
Plastic Storage
Case
unpacking
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please call
Harbor Freight Tools at the number shown
on the cover of this manual as soon as
possible.
initial Set up
inStructionS
read the entire iMportant
SafetY inforMation section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
operating inStructionS
general operating instructions
1.
Press the red "on/off" button to turn
the display screen on. Moving the
SKU 97675
for technical questions, please call 1-800-444-3353.
1.5V DC LR44 Button Cell
Battery Included (1)
1. One Year Continuous
Use (Approx.)
2. 3 Years Normal Use
(Approx.)
Decimal & Metric
0.0005", 0.01mm or 1/128"
+/- 0.001" or 0.03mm
Outside, Inside, Depth,
Step,
0.33 lbs
0"-6", 0mm-150mm,
32° - 104°F
Form cut high-density foam
lines interior
display head will also automatically
turn the screen on.
2.
Slide the display head all the way
to the left. Zero the readout with the
yellow button if necessary.
3.
Press the blue button to select the
measurement type desired: inches,
inches/fractional or millimeter.
Measuring in one measurement
type such as inches, and switching
to another such as millimeter or
fractions, automatically converts the
readout to the new measurement
type and value.
4.
Take measurements by moving the
display head. Place the thumb on the
Thumb Control (double steel wheels)
and slide to where desired.
5.
The display head can be locked with
the knurled knob at the top edge of
the display head.
6.
When done using, press the red on/
off button and turn the readout off.
7.
Place the calipers back into the
storage case for safe keeping.
8.
The power turns off automatically if
unused for approximately 4-5
minutes.
9.
Screen displays "low battery icon"
when battery level becomes low.
Procedures not specifically
explained in this manual
must be performed only by a
qualified service technician.
Page 3
Advertisement
