Cooking By Time - GE Monogram ZMW2000 Series Use And Care Manual

COOKING BY TIME
Time Cook
Time Cook allows you to microwave for a selected
amount of time.
Power level 10 (High) is recommended for most
cooking, but you may change this for more flexibility.
To become better acquainted with time cooking, make
a cup of coffee by following the steps below.
Step 1: Fill a cup
2/3 full of water, add
1 teaspoon of instant
coffee and stir to
dissolve. Use a cup
that has no metal
decoration and is
microwave-safe (refer
to Microwaving Tips
section). Place cup in
oven and close door.
TIME
COOK
Step 2: Touch TIME COOK pad.
Step 3: Select your time. Touch pads 1,
0 and O for one minute.
j
Because automatic power level 10 is recommended
for this cup of coffee, there is no need to change the
power level. (If power level 10 is not appropriate, see
"How to Change Power Level" below.)
Step 4: Touch the START pad.
START
Step 5: When time is up, the oven signals and flashes
"End." The oven, light and fan shut off.
Step 6: Open the door.
If you interrupt Time Cook to check the food, simply
close the door and press START to resume cooking.
If there is not time remaining on timer you must reset
the timer to resume cooking.
How to Change Power Level
After setting cooking time, touch POWER
LEVEL pad, then touch desired number for new
power level. Then touch START.
Using the Time Cook II Feature
The Time Cook II fealure lets you set two time
cooking functions within one program. This is ideal if
you want to change power levels during your cooking
operations. Here's how to do it.
Step 1: Place food in oven in microwave-safe
container and close the door.
i Step 2: Touch TIME COOK pad.
Tl_
COOK
Step 3: Select your first cook time. For example,
touch 2, 1 and 5 for two minules and 15 seconds.
Step 4: Touch TIME COOK pad.
Step 5: Set your second cook time.
Step 6: Change the power level.
How to Change Power Level
After setting cooking time, touch POWER LEVEL
pad, then touch desired number for new power level.
Step 7: Touch START.
Step 8: "POWER 10'Tis displayed and Cook Time 1
is shown counting down.
Step 9: At the end of Cook Time 1, the second
power level is displayed and Cook Time 2 is shown
counting down.
Step 10: When time is up, the oven signals and
flashes "End." The oven, light and fan shut off.
Step 11: Open the door.
If you interrupt Time Cook to check the food, simply
close the door and press START to resume cooking.
If there is not time remaining on timer you must reset
the timer to resume cooking.
h'ontinued next page)
11