Troubleshooting Tips - GE JRP24BD1BB Owner's Manual

Before YouCall ForService...
Troubleshooting "tips
Possible Causes What To Do
You have a function • Press the CLEAR/OFF pad. Anew the oven to cool for
error code. one hour. thLt the oven backinto operation.
If the function • Disconnect "allpower to the oven for at least 30
code repeats, seconds and then reconnect power, ffthe function
error code repeats, call for service.
A fuse in your home may " Repl.ce the fuse or reset the drcuit breaker.
be blown or the circuit
breaker tripp_L
: black-out mode.
iiiiiiiii_iiiiiiiiiiii_i_!ii_iiiiiiiiiiiiiiiiiiiiiiiiiiii_ _i_
Power failure. • Reset the clock.
Oven control pads were • The BAKE and BROIL HI/tO pads must be pressed
not pressed properly, at the same time and held for 3 seconds.
• Reset the clock. If the oven was in use, you must reset
it by pressing the CLEAR/OH= pad, setting the clock
and resetting any cooking function.
H
,_,_ • To speed the process, set a self-clean cycle for a
minimum ,,f 3hours.Seethe Usino the_elt-ote_oing
m:_ oven secdon.
iiiiiiiiii [iiin : iiiiiiiiiiiiii
•This istemporary
• This is normal. The cooling fan will turn off and on.
Power outage or surge.
This is normal in a
new oven and will
disappear in time.
An odor from the insulation
around the inside of the
oven is normal for the first
few times the oven is used.
A cooling fan may
automatically turn
on and off to cool
internal parts.
24