www. GEAppliances.com
The oven door must be closed and all controlsmust be set correctly for the cycle to work properly.
How to Delay the Start of Cleaning
[]
PresstheSELFCL_Npad.
[]
Using the HOURand MIN+ or-
pads, enter the desired clean time.
[]
PresstheOELAYSTAlO'pad.
Using the HOUR and MIN + or-
pads, enter the time of dayyou want
the clean cycle to start.
The door locks automaficaUy.
The display
will show the start time. It will not be
possible m open the oven door undl
the temperature
drops below the lock
temperature
and file LOCKEDfight
goes o02
When the LOCKED light is el:t; open
the door.
[]
Press the STP_T pad.
Alter a Clean Cycle
You may nodce rome white ash in the
oven. Wipe it up with a damp doth "after
the oven cools.
if white spotsremain,removethemwith a soap.
filled steel wool padandrinse thoroughlywith a
vinegarand watermixture.
The_
deposits are usually a salt
residue
that cannot be rem_wed by
the dean cycle.
If the oven is not dean "after one clean
cyde, repeat
the cycle.
You _trmot set the oven for cooking
until the oven is cc_fi enough
for die
door to unlnck.
.*}_ tithe
shelves become hard to
slide, wipe the shelf supports with
cooking oil.
17