Table of Contents
Advertisement
When the answerer isn't playing messages, press and hold ERASE until you hear a
beep. You can retrieve messages erased this way by pressing PLAY/STOP-- but only if
you haven't used any other answerer functions after erasing the messages.
Note: If you hear several high-pitched beeps, your answerer has not erased the
]
messages because some of them or all of them have not been played.
J
M ogY
When the memory is full, the MESSAGES indicator flashes rapidly and the unit
answers after 10 rings. When calling your machine from another phone (called Remote
Access. See p. 10), enter the 3-digit security code after you hear the beep and the
messages play automatically. In order for your machine to record new messages, you
must erase some of the messages. You can erase messages remotely by pressing 0
while a message is playing.
8
Advertisement
Table of Contents
