GE Appliances GHDX100GM0WW Owner's Manual page 9

About reversing the door. GEAppliances.com
Reversing the Door
Toolsneeded.
I Standard #2 I Tape-tipped
Phillipsscrewdriver putty knife
r_] open the door and remove the filler plugs opposite the hinges. With the door completelg
open, remove the bottom screw from each hinge on the drger face. Insert these screws
about half wag into the TOPholes, for each hinge, on the opposite side (where gou
removed the filler plugs).Applg firm pressure to get the screw started in new holes.
r2-] Loosen top screw from each hinge on the drger face half wag. With one hand holding the
top of the door and the other hand holding the bottom, remove the door from the drger
bg lifting it UP and OUT.
r_] Rotate the door 180°. Insert it on the opposite side of the opening bg moving the door
IN and DOWN until the top hinge and the bottom hinge are resting on the top screws
inserted in step 1.
r_ Removethe remaining screws from the side of the opening from which the door
was removed. With these screws, secure each hinge at the bottom. Tighten the
two top screws of each hinge. Reinsertthe plastic plugs on the side from which
the door was removed.