GE Appliances AG_18 Owner's Manual And Installation Instructions page 12

Window Installation Instructions.
Remove the Air Conditioner From the Case
[_] Remove tile 2 shipping s(rews fiom tile ba(k of
the case.
] Remove tile 2 screws on each side of the case.
Keep these for later use.
Shipping screws
[_] Slide tile air conditioner fiom tile case by
gripping tile base pan handle and pulling
ti)iward while bracing tile case.
12
Prepare the Window and the Case
[_] (;ut tile window sash seal to tile proper length.
Peel offthe backing and attach tile seal to tile
underside of the window sash.
Bottomofcase
[] (;areftflly insert the pl_tstic fiame guides into
tile bottom of the case on each side.
tuide
[_ Remove the backing tiom the top mounting
rail seal strip and attach the seal to the bottom
of the top mounting rail.
[_] Install tile top mounting r_filwith 5 type A
screws on the inside of the case. Insert the
fiames fin the accordion panels into the top
mounting rail and the ti_une guides. Attach
the accordion panels/o the side of the case
using 5/ype A screws.
Topmountingrail
c_
G_
Frame guides
12