Preparation
Wine Reserve
wine reserve
location
Do not install the wine reserve where
temperatures will be below 60°F (16°C}because
it will not maintain proper temperatures, and the
wine reserve will develop high internal humiditg.
For proper installation, the wine reserve must
be placed on a level surface of hard material
the same height as the rest of the flooring.
This surface should be strong enough to
support a fully loaded wine reserve,
or approximately
1,200 Ibs. each. See
the Installation Instructions for complete
directions.
Clearances
Allow 15" minimum clearance between the door
and wall for a full 115° door swing. Allow 5" min.
clearance to a wall for a 90° door swing for
Monogram Stainless Steel (European) models.
115 ° DoorSwing
L_
15"_
4inimum
to Wall
115 °
g0° Door Swing
!_
iii
I 32"
i
go o
I
J
L_
I------I
4" distance to Wall.
16