Careandcleaning Oftherange; Control Knobs - GE JS905 Owner's Manual

Careandcleaning oftherange. ,e.co
Be sure aft controls are off and aft surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is reengaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injury.
How to Remove Protective Shipping Film and Packaging Tape
Careflllly grasp a corner of file protective
shipping fihn with your finge_s and slowly
peel it from dxe appliance surface. Do
not use any sharp items to remove file
fihn. Remove aU of the film before using
the appliance for the fi_st time.
To assure no damage is done to the
finish of file product, the safest way to
remove the adhesive flom packaging
tape on new appliances is an application
of a household liquid dishwashing
detergent. Apply with a soft cloth and
allow m soak.
NOTE:Theadhesive mustbe removed fromaft
parts.It cannot b e removed if it is bakedon.
Control Knobs
Thecontrol knobs may be removed for easier
cleaning
Make sure die knobs are in die OFF
positions and pull them straight off the
smms for cleaning.
The knobs can be cleaned in a
dishwasher or flley may also be washed
with soap and water. Make sure the insides
of the lmobs are d_y before replacing.
Replace the knobs in the OFF position
m ensure proper placement.
¸¸¸¸7
Oven Vent
Theovenventislocated abovetheleft sideof
thedoor.
This area could become hot du_-ing
oven use.
It is nomlM for smam to come out of
file vent.
Theventis important f orproper air circulation.
Never b/ockthis vent.
Stainless Steel Surfaces (onsomemodels)
Do notusea steel woolpad;# will scratch
thesurface.
To clean file stainless steel surface,
use warm sudsy water or a stainless smel
cleaner or polish. Ahvays wipe the surface
in the direction of the grain. Follow the
cleaner insnucfions for cleaning the
stainless steel surface.
To inquire about purchasing stainless
smel appliance cleaner or polish, or m
find the location of a dealer nearest you,
please call our mll-fiee number:
NationalPartsCenter
1.800.626.2002
ge.com
21