GE Profile JS905SKSS Dimensions And Installation Information

JS905SK
GE Profile 30" Slide-In Electric Range
™
Dimensions and Installation Information (in inches)
Note: Cabinets installed adjacent to slide-in ranges must have an adhesion
KW Rating
spec of at least 194° temperature rating.
240V
11.6
Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent
208V walls below countertops. To reduce possibility of scorching walls, engineering
8.7
recommends a minimum of 1-1/2" spacing to allow for possible extended,
Breaker Size
high-heat, no-load heating element operation.
240V 40 Amps
Receptacle Locations: For all 30" Slide-In Ranges locally approved flexible
service cord or conduit must be used because terminals are not accessible
208V 40 Amps
after range installation. See shaded area in drawing for location of electrical
outlet box. Recommended outlet locations allow range to be installed directly against rear wall.
30" Slide-In Range
Optional Kits For Slide-In Body Sides
Dimensions (in inches)
Electric Ranges
(Slide-in ranges are sold
(Available At Additional Cost) without sides installed. Can
30" Slide-In Range
be installed on either left
Accessory Backguards
Dimensions (in inches)
or right when unit has one
(Attaches to the back of range
exposed side [no cabinet
as a backguard when unit is
adjacent]. Kit contains
installed in 30" free-standing
1 body side)
cutout)
JXS77WW (White)
JXS32SS (Stainless) - 4" High
JXS77CC (Bisque)
JXS32WW (White) - 4" High
JXS77BB (Black)
15" Min.
JXS32CC (Bisque) - 4" High
Vertical Side Trim Kits
JXS32BB (Black) - 4" High
(If cabinet cutout width is
15" Min.
JXS37WW (White) - 5-1/4" High more than 30", a vertical
JXS37CC (Bisque) - 5-1/4" High side trim kit may be used to
JXS37BB (Black) - 5-1/4" High close the gap between the
range and cabinet)
JXS86WW (White)
JXS86CC (Bisque)
JXS86BB (Black)
Installation information: Before installing, consult installation instructions
*Wall to front of
packed with product for current dimensional data.
closed door handle
on model JSP34.
For answers to your Monogram, 28" on models GE Profile
®
*Wall to front of
JSP26/JSS26/16.
GE appliance questions, visit our website at
®
closed door handle
on model JSP34.
ge.com or call GE Answer Center ® service,
28" on models
JSP26/JSS26/16.
800.626.2000.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls
below countertop if the range side trims above the countertop extend beyond the cabinet
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest
combustible surface.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls
below countertop if the range side trims above the countertop extend beyond the cabinet
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest
combustible surface.
30" Slide-in Elec. Range
Aug. 8, 2003 -km
30" Slide-in Elec. Range
Aug. 8, 2003 -km
Optional Lower Trim Kits
(If counter height is greater
than 36.5", a lower trim kit
is recommended to extend
the useful height to 38"
maximum)
JXS56WW – White
JXS56CC – Bisque
Maintain
JXS56BB – Black
at least 6"
from nearest
30" Min.
Optional Top Filler Kits
combustible
6 Maintain surface.
JXS66WW – White
at least 6"
JXS66CC – Bisque
from nearest
30" Min.
combustible
JXS66BB – Black
31-1/2
6 surface.
30
4-1/2
6
31-1/2
5
30
4-1/2
2-1/4 6
Acceptable
5
Electrical
Outlet Area
2-1/4
Acceptable
Electrical
Outlet Area
28-1/4*
or
™
45-1/8
28-1/4*
45-1/8
If you are NOT using the
Filler strip or Backguard:
If you are NOT using the
Filler strip or Backguard:
23-3/16
23-3/16
30
30
If you are using the
Filler strip or Backguard:
36
If you are using the
Filler strip or Backguard:
25
36
25
30
30
30
30
30
24
2-7/8"
To Front
Surface Of
Countertop
24
2-7/8"
To Front
Surface Of
Countertop 20-5/8" Door
Clearance
From Front
Surface of
Countertop
20-5/8" Door
Clearance
From Front
Surface of
Countertop
30 " Mi n.
Recommended
6" Min.
From Walls
30 " Mi n.
Acceptable
23-3/16
Outlet Area
35-7/8"–38"
from floor to
countertop
2-1/2
30
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Revised 1/08
24
2-7/8"
To Front
Accessory
2-1/2
Backguard
A/B*
31-1/4
Accessory
Backguard
A/B*
31-1/4
36-1/4
36-1/4
*JXS37 is 5-1/4" and JXS
25-3/4**
(excluding handle)
**Total depth from wall to
front of closed oven do
including handle is 27-1
*JXS37 is 5-1/4" and JXS32
25-3/4**
(excluding handle)
**Total depth from wall to
front of closed oven door
including handle is 27-13/16
Shave Raised Edge To Clear
31-1/8" Wide Control Panel
Excluding Models JSS28 and JSP39
9/16
Electrical
13" Max.
15" Min.
25
7-1/2
2-1/2
Listed by
Accessory
Underwriters
Backguard
Laboratories
220444
A/B*
31-1/4