Touch Panel Settings (Settings When Using Touch Panel) - Panasonic TH-65PF50U Operating Instructions Manual

Touch Panel settings (Settings when using Touch Panel)

The mode to restrict NANODRIFT SAVER (see page 41) operation when using Touch Panel (available as an option) is
set up.
Options
Weekly Command Timer
Audio input select
Touch Panel settings
Press ACTION ( ) button
Touch Panel settings
Touch Panel mode On
Calibration mode
Calibration mode
This setting is used in calibrating a touch panel.
You can confi gure the setting if "Touch Panel mode" is "On".
Touch Panel settings
Touch Panel mode On
Calibration mode
Calibration mode
1/3
Set "Touch Panel mode" to "On".
select
1
adjust
2
Select "Calibration mode" and then press
select
1
set
2
The screen is displayed in the middle and NANODRIFT is deactivated for 180 seconds.
After 180 seconds or when you have the menu displayed with a remote control, Calibration
mode is cancelled.
Note:
For information on how to set up Calibration, please see Touch Panel instruction manual.
Options Adjustments
NANODRIFT SAVER in Touch Panel mode: On
The value set for NANODRIFT turns into "ON" and displayed
in gray.
The moving distance of NANODRIFT is limited to 5 × 5 dots to
prevent pointer drift on a touch panel.
.
When the menu is not displayed
(normal screen)
Hold down for over 3 seconds.
61