Troubleshooting For 3D Eyewear; Table Of Images That Can Be Seen For Each 3D Picture Format And The Source Image Format - Panasonic TH-65PF50U Operating Instructions Manual

Hd plasma display
Table of Contents

Advertisement

Viewing 3D images

Troubleshooting for 3D Eyewear

Symptoms
Cannot see 3D images
3D Eyewear is turned off automatically
There is something wrong with the 3D
images
Indicator lamp will not light when the 3D
glasses are turned ON.
Table of images that can be seen for each 3D Picture
Format and the source image format
If the picture appears to be abnormal, refer to the table below to choose the correct 3D picture format setting.
3D INPUT FORMAT
Source image
format
Side by side
Top and bottom
Normal format
(2D)
When the source image is not recognized correctly
*1
*2
When "3D FUNCTION" is set to "ON", the images will be displayed with 3D effect. When set to "OFF", displayed
without 3D effect.
• Depending on the player or contents, the image may be different from the above illustrations.
24
• Has the 3D Eyewear been switched On?
• Ensure that "3D FUNCTION" in "3D SETTINGS" is set to "ON". (see
page 37)
• Some 3D image signals may not be automatically recognized as 3D
images. Set "3D INPUT FORMAT" in "3D SETTINGS" to match the
picture format. (see page 37)
• Check if 3D IR TRANSMITTER is turned on and corrected properly.
• Check that there are no obstacles between the 3D IR TRANSMITTER
and the 3D Eyewear. If the 3D Eyewear stops receiving the infrared
signal for about 5 minutes, the 3D Eyewear will be turned off
automatically.
• Check the available area to use the 3D Eyewear.
• Depending on the person, the 3D images may be diffi cult to see, or
cannot be seen, especially in users that have a different level of eyesight
between the left and right eyes.
Take the necessary steps (wearing glasses etc.) to correct your eyesight
before use.
• Check that there are no obstacles between the 3D IR TRANSMITTER
and the 3D Eyewear or that the 3D Eyewear is placed inside the
coverage area. If the 3D Eyewear stops receiving the infrared signal for
about 5 minutes, the 3D Eyewear will be turned off automatically.
• Switch "SWAPPED" and "NORMAL" under "LEFT/RIGHT SWAP" in "3D
SETTINGS" (see page 37).
• The battery may be running low or fl at. Change the battery or charge the
3D glasses.
AUTO
SIDE BY SIDE
*
Normal *
1
2
*
1
Normal
Checks
TOP AND BOTTOM
NATIVE
Normal *
2
Normal

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-60pf50u

Table of Contents