Digital Zoom - Panasonic TH-65PF50U Operating Instructions Manual

Digital Zoom

This displays an enlargement of the designated part of the displayed image.
1
Display the operation guide.
During Digital Zoom, only the following buttons can be operated.
[Remote control]
2
Select the area of the image to be enlarged.
3
Select the magnifi cation required for the enlarged display.
4
Return to normal display (quit Digital Zoom).
Notes:
• When power goes OFF (including "Off Timer" operation), Digital Zoom terminates.
• The Digital Zoom function cannot be selected while in the following operation state:
During 3D image (see page 37).
When MULTI DISPLAY SETUP is ON (see page 47).
When PORTRAIT SETUP is ON (see page 49).
When SCREENSAVER (except for NEGATIVE IMAGE) is running. (see page 38)
• While Digital Zoom is in operation, "Adjusting POS./SIZE" cannot be used.
22
Press to access Digital Zoom.
The operation guide will be displayed.
OFF TIMER button
VOL button
MUTE button
POSITION /
ACTION button
Press on the enlargement location to select.
The cursor will move.
Each time this is pressed, the magnifi cation factor changes.
This is shown in the image being displayed.
Press to exit from the Digital Zoom.
[Unit]
INPUT MENU -/ VOL
VOL button
1 2
EXIT
1
+
/ ENTER/
EXIT
2 2
3 4