Focus Adjustment; Iris (Brightness) Adjustment; Register Preset Positions; Move To Preset Positions - Panasonic WJ-NV200K Operating Instructions Manual

Focus adjustment

Adjust the focal point. The auto focus function is available.
Focusing can be adjusted by clicking the [Near] button or the [Far] button.
The auto focus function can be performed by clicking the [Auto] button.

Iris (brightness) adjustment

Adjusts the lens iris of the camera.
The brightness (lens iris) can be adjusted by clicking the [–] (darker) button or the [+] (brighter) button. It is pos-
sible to reset the adjusted brightness by clicking the [Reset] button.

Register preset positions

Register the current camera position as a preset position. The preset positions can be registered only when
using a camera supporting the preset position function.
Step 1
Perform the pan/tilt operation to move the camera to
the position to be registered.
Step 2
Click the [C] button in the [Preset Position] box to
select a preset number (1 - 256).
Note:
• It is impossible to register the position as "Home".
Some Panasonic cameras allow you to register a
[Home] position. Refer to the "readme.txt" on the
provided CD-ROM about the supported camera.

Move to preset positions

Move the camera to the preset position registered in advance. Preset positions need to be registered in
advance.
Step 1
Click the [C] button in the [Preset Position] box to
select a preset number (Home, 1 - 256).
Step 3
Click the [Regist] button.
→ The preset position will be registered under the
selected preset number.
Step 2
Click the [Call] button.
→ The camera moves to the registered preset posi-
tion respective to the selected preset number.
87