Marantz SR7005 User Manual page 115

GHDMIH
Symptom
No audio is • Check the connection of the HDMI connectors.
output with HDMI • When outputting HDMI audio from the speakers, set "HDMI
connection. Audio Out" on the menu to "AMP".
• When outputting HDMI audio from a TV, set "HDMI Audio Out"
on the menu to "TV".
No video is • Check the connection of the HDMI connectors.
output with HDMI • Set the input source to match the connected HDMI connector.
connection. • Check whether the TV is compatible with copyright protection
(HDCP). If connected to a device not compatible with HDCP, video
will not be output correctly.
When the following • Set "HDMI Control" on the menu to "OFF". To operate power
operations are only for each device, set "Power Off Control" to "OFF".
performed on
devices compatible
with HDMI control,
the same operations
occur on this unit.
• Power ON/OFF
• Switching audio
output devices
• Adjust volume
• Switch input source
GRadioH
Symptom
Reception fails, or • Change the antenna orientation or position.
there is a lot of noise • Separate the AM loop antenna from the unit.
or distortion. • Use an FM outdoor antenna.
• Separate the antenna from other connection cables.
GM-XPortH
Symptom
Audio is not output • Check that the Bluetooth device and Wireless receiver (RX101)
when a wireless are correctly paired.
receiver (RX101 is
connected).
SVENSKA NEDERLANDS
Cause/Solution
Cause/Solution
Cause/Solution
ESPAÑOL ITALIANO
GInternet radio / Media server / iPod / USB memory device / Flickr / Napster / Last.fmH
Page Symptom
16 When a USB • The set cannot recognize a USB memory device. Check the
77 memory device is connection.
connected, "USB" is • A USB memory device not conforming to mass storage class or
77 not displayed on the MTP standards is connected. Connect a USB memory device
menu. conforming to mass storage class or MTP standards.
• A USB memory device that the set cannot recognize is connected.
16
This is not a malfunction. Marantz does not guarantee that all USB
16, 25
memory devices will operate or receive power.
15
• USB memory device is connected via USB hub. Connect the USB
memory device directly to the USB port.
Files on a USB • USB memory device is in format other than FAT16 or FAT32.
52, 77
memory device Set the format to FAT16 or FAT32. For details, refer to the USB
cannot be played. memory device's operating instructions.
• USB memory device is divided into multiple partitions. When
divided into multiple partitions, only files stored in the top partition
can be played.
• Files are stored in a non-compatible format. Record the files in a
compatible format.
• You are attempting to play a file that is copyright protected. Files
that are copyright protected cannot be played on this set.
The file names • Characters that cannot be displayed are used. This is not a
are not displayed malfunction. On this set, characters that cannot be displayed are
properly ("...", etc.). replaced with a " . ".
Internet radio cannot • Ethernet cable is not properly connected or network is
Page
be played. disconnected. Check the connection status.
22 • Program is being broadcast in non-compatible format. Only
22 Internet radio programs in MP3 and WMA can be played on this
22 set.
• The computer's or router's firewall is activated. Check the
22
computer's or router's firewall settings.
• Radio station is not currently broadcasting. Choose a radio station
Page that is currently broadcasting.
• IP address is wrong. Check the set's IP address.
–
Files stored on a • Files are stored in a non-compatible format. Record in a compatible
computer cannot be format.
played. • You are attempting to play a file that is copyright protected. Files
that are copyright protected cannot be played on this set.
• Set and computer are connected by USB cable. The set's USB
port cannot be used for connection to a computer.
Server is not found, • The computer's or router's firewall is activated. Check the
or it is not possible computer's or router's firewall settings.
to connect to the • Computer's power is not turned on. Turn on the power.
server. • Server is not running. Launch the server.
• Set's IP address is wrong. Check the set's IP address.
• Connecting to the media server may take a few minutes the first
time you attempt to make a connection.
iPod cannot be • Some iPods do not support being used connected directly to the
played. USB port.
FRANÇAIS DEUTSCH
Cause/Solution
ENGLISH
Page
20
–
–
–
–
–
28
28
–
24
33
–
33, 34
79
33
33
–
–
–
–
79
–
20
109