Advertisement
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle.
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for the tool can result in SERIOUS INJURY to the user
-
as well as damage to
the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with
voltage less than the nameplate rating is harmful to the motor.
ADDITIONAL SAFETY RULES FOR SANDER
1. Check the backing pad carefully for cracks, damage or deformity before
2. Hold the tool firmly.
3.
Keep hands away from rotating parts.
4. Make sure abrasive disc is not contacting the workpiece before the switch
5. Do not leave the tool running. Operate the tool only when hand-held.
6. Do not touch the workpiece immediately after operation;
it
may be extremely
operation. Replace cracked, damaged or deformed pad immediately.
is turned on.
hot and could burn your skin.
4
Advertisement
