Trouble Shooting - Makita DPC 7000 Owner's And Safety Manual

Guarantee
MAKITA guarantees the highest quality and will therefore reimburse all costs for repair by replacement of damaged parts resulting from
material or production faults occurring within the guarantee period after purchase. Please note that in some countries particular
guarantee conditions may exist. If you have any questions, please contact your salesman, who is responsible for the guarantee of the
product.
Please note that we cannot accept any responsibility for damage caused by:
Incorrect carburetor adjustment.
Normal wear and tear.
Cleaning, servicing and adjustment work is not covered by the guarantee. All repairs covered by the guarantee must be performed by
a MAKITA service centre.
Disregard of the owner's manual.
Non-performance
of
the required maintenance and cleaning.
Obvious overloading due
to
permanent exceeding of the upper performance limits.
The use of other than original MAKITA cutting discs.
Use of force, improper use, misuse or accidents.
Damage from overheating due to dirt on the fan housing.
Work on the Power Cut by unskilled persons or inappropriate repairs.
Use of unsuitable spare parts or parts which are not original MAKITA parts, insofar as they have caused the damage.
Use of unsuitable or old oil.
Damage related to conditions arising from lease or rent contracts.
Trouble shootig
Malfunction
Cutting disc does not
start turning
Engine does not start
only with difficulty
Warm start difficulties
Engine starts, but
dies immediately
Insufficient power
System
Clutch
Ignition system
Fuel supply
Compression
system
Mechanical
malfunction
~
Carburetor
Fuel supply
Several systems
may be involved
simultaneously
0
bservat
ion
Engine runs
Ignition spark
No ignition spark
Fuel tank is filled
Inside
Outside
Starter does not engage
Fuel tank is filled
Ignition spark
Fuel tank is filled
Engine is idling
Cause
Damage to clutch
Malfunction in fuel supply system, com-
pression system, mechanical malfunction.
Switch on STOP, fault or short-circuit in the
wiring, plug cap or spark plug defective.
Choke in wrong position, carburetor defective,
suction head dirty, fuel line bent or interrupted.
Cylinder base packing ring defective, radial
shaft packings defective, cylinder or piston rings
defective
Spark plug does not seal.
Spring in starter broken, broken parts
inside the engine.
Wrong carburetor adjustment.
Wrong idling adjustment, suction head or
carburetor dirty.
Tank venting defective, fuel line interrupted,
cable defective, STOP switch defective. Starting
valve dirty (DPC 7001, DPC 9501).
Air filter dirty, wrong carburetor adjustment,
Tuffler clogged, exhaust channel in cylinder
:logged.
24