Advertisement
Insert battery cartridge fully into the port
so
that it rests on the charger port floor.
Check to see that the charging light
comes on. When
it
goes out, you may re-
move the fully charged battery cartridge.
After charging, unplug the charger from
the power source.
Battery cartridge
1000
I
\
Charging light
Fig.
*Sometimes the charging light will not come on after you insert
a
cartridge from a just-
operated tool. Let the cartridge cool off for a while. Then re-insert
it
and try to charge
it
once more.
I f you wish to charge two battery cartridges, allow 15 minutes between charging on the
fast battery charger.
Installing or removing blade
CAUTION
:
Be sure that the battery cartridge has been removed from the tool.
* T o
remove the blade. use the wrench
to
hold the outer flange in place while
loosening the hex bolt counterclockwise
with the socket wrench.
I
I
Fig. 8
9
Advertisement
