Advertisement
Bevel cutting
0Loosen the wing nut on the bevel scale
plate on base front. Set for a desired
angle (0
- 45')
by tilting accordingly,
then tighten the wing nut firmly.
L
I
Fig. 12
CAUTION
:
I t is extremely dangerous to cut with the saw when the wing nut has not been fully
tightened. Always secure the wing nut carefully after adjusting cutting depth.
Sighting
0Use the right notch of the top guide for straight cuts. The left notch is for 45" bevel
cuts.
F o r 4 5 '
Zuqbstraight
bevel cuts
Top guide
A
Base plate
I
Fig. 1:
Switch operation
0
The trigger switch comes with a lock-off
plate. When the lock-off plate
i s
pulled
back in the arrow direction, the trigger
can be pulled to turn the tool on, and
released to turn
it off.
\
Top guide
Fig. 1
Fig. 15
CAUTION
:
Before inserting the battery cartridge into the tool, always check to
see
that the trigger
switch actuates properly and returns to the "OFF" position when released.
11
Advertisement
