Specifications - Laney Richter Bass RB5 Manual

Supply Voltage on all models:- Factory
Preset
Mains Fuse: ~100V>~120V
~220V>~240V
Power Consumption
Output Power Rating
Loudspeaker 12" Custom Designed Driver + high frequency
Features:
EQ
D.I.
Tuner Out
FX Loop
Ex. Loudspeaker Socket
Input Impedance
Recommended Min Ex speaker Power
Recommended Richter Ex Cabinet
Side Handles
Size
Unit Weight
Packed Weight
This product conforms to the requirements of the following European Regulations, Directives & Rules:-
In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal Household
waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the
In the interest of continued development, Laney reserves the right to amend product specification without prior notification.
RB5
T5A L
T2A L
240W
120W
horn
Normal & Hi Inputs
Switchable compressor with Activity Light
Switchable Limiter with status light
Switchable high frequency horn
Enhance
Kickback style cabinet
Bass (±12dB at 40Hz, Shelving)
Paramid (±12dB at 100Hz > 1KHz Peaking)
Treble (±15dB at 3.5KHz, Shelving)
Presence (+10dB at 2KHz, Peaking)
Yes, Balanced XLR
Yes
Yes - (0dBu Nominal) (Series-Insert)
(8 Ohms minimum, internal speaker remains
connected)
1M Ohm/100pF
80W
RB115 / RB410
Yes - Comfortable Contoured Grip
482*420*445 (H*W*D)
18.4Kg
20Kg
CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (2004/108/EEC),
RoHS (EU2002/95/EC), WEEE (EU2002/96/EC)
WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.
RB6
~100V, ~120V, ~220V, ~230V, ~240V 50/60Hz
T5A L
T2A L
300W
165W
15" Custom Designed Driver + Switchable HF
Horn
Normal & Hi Inputs
Switchable compressor with Activity Light
Switchable Limiter with status light
Switchable high frequency horn
Enhance
Kickback style cabinet
Bass (±12dB at 40Hz, Shelving)
Lo Paramid (±12dB at 100Hz > 1KHz Peaking)
Hi Paramid (±12dB at 400Hz > 4KHz Peaking)
Treble (±15dB at 3.5KHz, Shelving)
Yes, Balanced XLR
Yes
Yes - (0dBu Nominal) (Series-Insert)
(8 Ohms minimum, internal speaker remains
connected)
1M Ohm/100pF
150W
RB115 / RB410
Yes - Comfortable Contoured Grip
565*502*490 (H*W*D)
26.5Kg
29Kg

SPECIFICATIONS

RB7
T6.3A L
T3.15A L
450W
300W
Two 10" Custom Designed Drivers + high
frequency horn
Normal & Hi Inputs
Switchable compressor with Activity Light
Switchable Limiter with status light
Switchable high frequency horn
Enhance
Kickback style cabinet
Bass (±12dB at 40Hz, Shelving)
Lo Paramid (±12dB at 100Hz > 1KHz Peaking)
Hi Paramid (±12dB at 400Hz > 4KHz Peaking)
Treble (±15dB at 3.5KHz, Shelving)
Yes, Balanced XLR
Yes
Yes - (0dBu Nominal) (Series-Insert)
(8 Ohms minimum, internal speaker remains
connected)
1M Ohm/100pF
150W
RB115 / RB410
Yes - Comfortable Contoured Grip
458*582*397 (H*W*D)
25Kg
27.5Kg
7