Specifications; Block Diagram - Laney LX 120RTwin User Instruction

Supply Voltage
Mains Fuse
Power Consumption
Output Power Rating
Loudspeakers
Features
Reverb
EQ
Input Impedance
Size
Unit Weight
INPUT
CLEAN
EQ SECTION
EQ SECTION
DRIVE
FOOTSWITCH
This product conforms to the requirements of the following European Regulations, Directives & Rules:
In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal
household waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the
~100V, ~120V, ~220V, ~230V, ~240V 50/60Hz Factory Option
~220V>~240V = T1A L. ~100>~120V = T2A L
220W
120W
2 Custom Designed 12" Drivers
TEC Tube Emulating Technology
XTS eXtreme Tone Shaping
Speaker socket
AUX IN (10K Input impedance)
FX Loop
Footswitchable
Yes
Both channels contain separate Passive Bass, Middle and Treble
1MOhm/47pF
479*680*275 (H*W*D)
22.7 Kg
REVERB
XTS
CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (2004/108/EEC),
RoHS (2011/65/EU), WEEE (EU2002/96/EC)
WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.
(Shipping Weight 24.2 Kg)
CD IN
FX FX PREAMP
SEND RETURN OUT
This loop is a series type
so all of your signal will go
through your FX unit.

SPECIFICATIONS

(Drive channel only)
(Minimum 8 Ohm Impedance)
(Nominal 750mV Input level)
(Nominal 750mV Level)
Yes, Channel and FX (FS2 Not Included)

BLOCK DIAGRAM

POWER
AMP IN
POWER
AMP
INTERNAL
LOUDSPEAKERS
EXTERNAL
LOUDSPEAKER
9